DJI Matrice 600 Pro Case
GPC’s case for the Matrice 600 Pro with Ronin-MX attached is designed to be as compact as possible for the most ergonomic travel size while meeting airline checked baggage restrictions. This case mimics the DJI original packaging in size with the need to remove the landing gear, but with much more rugged protection and accessory storage cavities. We have packed everything you need for long day of production. To increase your flying time, we have cavities for 2 Hex Chargers and 18-Batteries. We have included the convenience of cavities that will accommodate keeping your Ronin MX attached, along with 5 Ronin batteries, follow focus in either configuration and more production accessories. We have also covered your monitor preference with the capability of storing any of your iPads or 5.5” or 7.85” CrystalSkys. Last, but not least we have included an adjustable gimbal stabilization pad, which holds the gimbal in place and reduces shock during transport.
Product Note: This case is designed for the Matrice 600 Pro form factor only. The original Matrice 600 frame or frames upgraded with the A3 Pro system are not compatible with this solution.
- Matrice 600 Pro w/ Ronin MX attached
- 2 Controllers (fits STD M600, M600 CrystalSky, or Ronin)
- 2 Monitors (DJI 5.5″ CrystalSkys, 7.875″ CrystalSkys or iPad up to 9.7″)
- CrystalSky Batteries or Accessories
- Follow Focus
- Follow Focus Accessories
- 2 Hex Chargers
- 18 M600 Batteries (6 in copter)
- 2 Ronin Series Intelligent Batteries
- 4 Ronin MX Batteries
- Landing Gear
DJI Matrice 600
|Dimensions||27 × 27 × 26 in|